PET RESIN OR PET CHIP

POLYETHYLENE TEREPHTHALATE

PET is the most commonly used acronym for the polymer polyethylene terephthalate.  PET is the most common form of polymer in the “polyester” polymer family. It is heated and shaped into plastic bottles, trays and containers for packaging foods and beverages, personal care products, and many other consumer products. 

INTRINSIC VISCOSITY (IV)

APPLICATION

BRANDS

END PRODUCT

I.V.0.80 + 0.02

I.V.0.80 resin is suitable for applications of bottled water, cooking oil, soy sauce and alcoholic beverage applications or for the larger wide mouth bottles.

RECRON, OCTAL, SHINPET, JADE, NANLON, TAIRILIN, HAINAN YISHENG, WANKAI, PAPET COOL, LIBOLON.

I.V.0.82 + 0.02 

I.V.0.82 is used for CSD, Drinking water, Tea, Liquor, Edible oil, Cosmetics bottle applications as well as hermoformed sheet. For food applications, the resin is considered safe based upon compliance with The Japanese Ministry of Health and Welfare, Notification No. 201, 2006 (Ex. No. 370, 1959). The specialty resin offers good gas-barrier properties, and is tasteless and odorless, with high flavor retention.

MITSUI, JADE, NANLON, OCTAL

I.V.0.84 + 0.02

I.V. 0.84 is typically used for  Carbonated drinks, Agro chemicals, APET sheet and PET strapping.

RECRON, OCTAL, SHINPET, JADE, NANLON, TAIRILIN, HAINAN YISHENG, WANKAI, PAPET COOL, LIBOLON.

I.V.0.76 + 0.02

I.V.0.76 resin is specially designed for applications of bottled water, cooking oil and alcoholic beverage applications or for the bottles with wide mouth.

RECRON, OCTAL, SHINPET, JADE, NANLON, TAIRILIN, HAINAN YISHENG, WANKAI, PAPET COOL, LIBOLON.

I.V.0.65 + 0.02

I.V.0.64 +/-0.02 Yarn grade or Textile grade PET chips are available in Super Bright, Semi Dull, Cationic Semi Dull and Cationic Super Bright PET Chips. The process of making PET Chips consists of mixing a thermoplastic polyester-resin material with an alumina tri-hydrate (ATH) filler and with a pigment, if desired, in a heated extruder to produce a continues stream of thermoplastic agglomerate. 

RECRON, JADE, NANLON.

I.V.0.80 + 0.02 (HOT FILL)

I.V.0.80 (Hot Fill)  resin is designed for Hot filled PET bottle, Heat-set crystallization PET Bottle. The resin is used for Juice bottle.

OCTAL, JADE, NANYA, LIBOLON, SHINPET.

I.V.0.86 + 0.02 

Inhibited Crystallization rate,suitable for thick wall container with high transparency, 5 gallon PET container, cosmetic bottle via injection or injection stretch blow molding. High clarity thick bottle, Big size bottle,5 gallon container,Heavy-gauge APET sheet

SHINPET & JADE